Product Name:Pretreatment of ST flocculant RO system
Product Category:RO reverse osmosis
Explanation:
Abbreviation: YY-R1002
Description: This product is a linear polymer, can be completely dissolved in water is a true solution.
Performance and scope of application:
1, polymer body containing strong cationic groups and active adsorption group, through charge neutralization and adsorption bridging the suspended particles and negatively charged water-soluble substances, flocculation instability. The water pollution substance is discharged from the system by sand filtration filtration and backwashing, which effectively avoids the deposition of pollutants on the membrane surface.
2, the use of this product less dosage, resulting in floc large, easy filtration, water turbidity, sludge production less.
3, pH adapt to a wide range, between 4.0-10.0.
4, this product odorless, tasteless, non-toxic, can be widely used in sand filtration Purification.

Quality indicator	appearance colorless or light yellow sticky colloid
Dynamic viscosity (CPS, 20 ��)	25000 ~ 95000
PH (1% aqueous solution)	3.5-7.0
Solid content%	�� 40
The molecular weight	�� 400000
The residual monomer%	��5

Usage and precautions:
1, when used alone should be configured into dilute solution, commonly used when diluted to 5% (volume concentration).
2, in source water, the dosage should be based on the turbidity and concentration of water to be treated to be, can through the test determination of sand filter effluent SDI value to confirm the optimum dosage. Conventional tap water dosing concentration for water supply 10mg / L.
3, the use of this product in order to measure the pump and the original pump chain investment appropriate, applied to the sand filter inlet.
4, this product should be sealed in a cool place, not failure within 12 months.
5, this product with 25 kg or 200 kg plastic barrel packaging.